Show simple item record

Study of the lower limp's angle during weightlifting exercises using an accelerometer-based system

dc.contributor.editorMarrugo A.G.
dc.creatorDiaz Parada R.A.
dc.creatorMartinez Santos J.C.
dc.identifier.citation2014 3rd International Congress of Engineering Mechatronics and Automation, CIIMA 2014 - Conference Proceedings
dc.description.abstractThis article describes the implementation and use of a two-accelerometer system to measure the angle formed between lower joints of weightlifters during the execution of the technical gesture. Being aware of movement between joints will allow identifying bad moves and prevent injuries in athletes. Likewise, it will help in turn to rehabilitation for people with problems in the movement of their joints. This design is based on open platforms both hardware and software. The preliminary result shows that we can connect a two-accelerometer system with an error in the measure of the angle no greater than 1.3% (0.795% on average). © 2014 IEEE.eng
dc.description.sponsorshipUniversidad Tecnologica de Bolivar
dc.format.mediumRecurso electrónico
dc.publisherInstitute of Electrical and Electronics Engineers Inc.
dc.titleStudy of the lower limp's angle during weightlifting exercises using an accelerometer-based system
dcterms.bibliographicCitationInstituto Distrital de Recreación y Deporte, ,
dcterms.bibliographicCitationMayagoitia, R.E., Nene, A.V., Veltink, P.H., Accelerometer and rate gyroscope measurement of kinematics: An inexpensive alternative to optical motion analysis systems (2002) Journal of Biomechanics, 35 (4), pp. 537-542
dcterms.bibliographicCitationCheng, P., Oelmann, B., Joint-angle measurement using accelerometers and gyroscopes?a survey (2010) Instrumentation and Measurement, IEEE Transactions on, 59 (2), pp. 404-414
dcterms.bibliographicCitationFry, B., Reas, C., (2014) Processing Library for Visual Arts and Design, ,, Aug
dcterms.bibliographicCitationXiao-Mao, G., Bao-Sheng, Z., Fan, Z., Yu-Jie, Y., Wei, Z., Xi, L., Optimal design model for crank-connecting rod mechanism of atype stirling engine (2011) Consumer Electronics, Communications and Networks (CECNet), 2011 International Conference On. IEEE, pp. 519-522
dcterms.bibliographicCitationVeltink, P.H., Franken, H.M., Detection of knee unlock during stance by accelerometry (1996) Rehabilitation Engineering, IEEE Transactions on, 4 (4), pp. 395-402
dcterms.bibliographicCitationDong, W., Chen, I., Lim, K., Goh, Y., (2007) Measuring Uniaxial Joint Angles with A Minimal Accelerometer Configuration, pp. 88-91
dcterms.bibliographicCitationDejnabadi, H., Jolles, B.M., Aminian, K., A new approach to accurate measurement of uniaxial joint angles based on a combination of accelerometers and gyroscopes (2005) Biomedical Engineering, IEEE Transactions on, 52 (8), pp. 1478-1484
dcterms.bibliographicCitation(2008) Producto Punto, ,
dcterms.bibliographicCitation(2014) ADXL35 Datasheet and Product Info, ,, Aug
dc.source.event2014 3rd International Congress of Engineering Mechatronics and Automation, CIIMA 2014
dc.subject.keywordsHardware and software
dc.subject.keywordsOpen platforms
dc.rights.ccAtribución-NoComercial 4.0 Internacional
dc.identifier.instnameUniversidad Tecnológica de Bolívar
dc.identifier.reponameRepositorio UTB
dc.relation.conferencedate22 October 2014 through 24 October 2014

Files in this item


There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record
Except where otherwise noted, this item's license is described as