Show simple item record

Linear model to estimate the degradation index on the processing of recycled polypropylene due to the addition of stabilizer

dc.creatorVélez J.
dc.creatorDe La Hoz E.
dc.identifier.citationIngeniare; Vol. 24, Núm. 1; pp. 85-93
dc.description.abstractIn the present research work, a lineal model to estimate the Processing Degradation Index (PDI) of polypropylene from recycled industrial waste and municipal solid waste is presented. According to the previous thing an experimental design was done with two types of residue changing the additive stabilizer from 0.1 % to 0.6 % and obtaining in every case a Processing Degradation Index with which it was possible to construct the linear model. Finally, it was established that the observed relationship of multiple extrusions and the processing degradation index shows that in the case of industrial waste is less compared to wastes from landfills using the same levels of stabilizing additives, and is also observed ranging from 0.05% to 0.60% levels of additives required to optimize the blocking of degradation with the latter being the optimal concentration of additive to minimize the Processing Degradation Index. © 2016, Universidad de Tarapaca. All rights reserved.eng
dc.format.mediumRecurso electrónico
dc.publisherUniversidad de Tarapaca
dc.titleLinear model to estimate the degradation index on the processing of recycled polypropylene due to the addition of stabilizer
dc.title.alternativeModelo lineal para estimar el índice de degradación a la procesabilidad del polipropileno reciclado debida a la adición de estabilizante
dcterms.bibliographicCitationGent, R., Menendez, M., Toraño, J., Torno, S., ""Optimization of the recovery of plastics for recycling by density media separation cyclones"" (2010) Resources, Conservation & Recycling., 55, 473p. ,, ISSN: 472 - 482. Fecha de consulta: 10 de abril de 2014
dcterms.bibliographicCitationTochácek, J., Jancar, J., Kalfus, J., Hermanová, S., Processing stability of polypropylene impact-copolymer during multiple extrusion e Effect of polymerization technology (2011) Polymer Degradation and Stability, 96, p. 492. ,, ISSN: 491-498. Fecha de consulta: 13 de marzo de 2014
dcterms.bibliographicCitationTochácek, J., Jancar, J., Processing degradation index (PDI) - A quantitative measure of processing stability of polypropylene (2012) Polymer Testing, 31, pp. 1116-1117. ,, ISSN: 1115-1120. Fecha de consulta: 2 de marzo de 2014
dcterms.bibliographicCitationGrisa, A., Zeni, M., Análisis Multivariado de Parámetros Fisicoquímicos del Relleno Sanitario de São Giacomo de Caxias do Sul, RS en la de Degradação de Polipropileno (2010) Polímeros: Ciência e Tecnologia, 20 (2), p. 160. ,, ISSN: 0104-1428. Fecha de consulta: 20 de febrero de 2014
dcterms.bibliographicCitationASTM International., ""Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer"" (2013) Designation D1238- 10 Fecha de consulta, ,, 9 de agosto de
dcterms.bibliographicCitationKachur, M., Los Plásticos, un material milagroso (2011) Benchmark Education, 9p. , Guangzhou, China. ISBN: 978-1-4509- 0883-2
dcterms.bibliographicCitationSato, H., Ogawa, H., ""Review on Development of Polypropylene Manufacturing Process""., ,, Sumitomo Chemical Co., Ltda. Process & Production Technology Center. Fecha de consulta: 12 de noviembre de 2013
dcterms.bibliographicCitationGrisa, A., Zeni, M., Muñoz, A., Análisis Multivariado de Parámetros Fisicoquímicos del Relleno Sanitario de São Giacomo de Caxias do Sul, RS en la de Degradación de Polipropilene (2010) Polímeros Ciencia y Tecnología, 20 (2), pp. 154-164. ,, ISSN: 0104-1428. Fecha de consulta: 15 de marzo de 2014
dcterms.bibliographicCitationHamskog, M., Klügel, M., Forsström, D.D., Terselius, B., Gijsman, P., The effect of base stabilization on the recyclability of polypropylene as studied by multi-cell imaging chemiluminescence y microcalorimetry (2004) Polymer degration and stability, 86 (3), pp. 557-566. ,, Fecha de consulta: 12 de noviembre 12 de 2013
dcterms.bibliographicCitationDe la Garza, J., Morales, B., González, B., Análisis estadístico multivariante (2013) McGraw-Hill, 332p. , México. ISBN: 978-6-0715-0817-1
dc.subject.keywordsIndustrial waste
dc.subject.keywordsMunicipal solid waste (MSW)
dc.subject.keywordsProcessing degradation index (PDI)
dc.subject.keywordsStabilizing additive
dc.rights.ccAtribución-NoComercial 4.0 Internacional
dc.identifier.instnameUniversidad Tecnológica de Bolívar
dc.identifier.reponameRepositorio UTB

Files in this item


There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record
Except where otherwise noted, this item's license is described as