Mostrar el registro sencillo del ítem

Study of the lower limp's angle during weightlifting exercises using an accelerometer-based system

dc.contributor.editorMarrugo A.G.
dc.creatorDiaz Parada R.A.
dc.creatorMartínez-Santos, Juan Carlos
dc.date.accessioned2020-03-26T16:32:50Z
dc.date.available2020-03-26T16:32:50Z
dc.date.issued2014
dc.identifier.citation2014 3rd International Congress of Engineering Mechatronics and Automation, CIIMA 2014 - Conference Proceedings
dc.identifier.isbn9781479979325
dc.identifier.urihttps://hdl.handle.net/20.500.12585/9044
dc.description.abstractThis article describes the implementation and use of a two-accelerometer system to measure the angle formed between lower joints of weightlifters during the execution of the technical gesture. Being aware of movement between joints will allow identifying bad moves and prevent injuries in athletes. Likewise, it will help in turn to rehabilitation for people with problems in the movement of their joints. This design is based on open platforms both hardware and software. The preliminary result shows that we can connect a two-accelerometer system with an error in the measure of the angle no greater than 1.3% (0.795% on average). © 2014 IEEE.eng
dc.description.sponsorshipUniversidad Tecnologica de Bolivar
dc.format.mediumRecurso electrónico
dc.format.mimetypeapplication/pdf
dc.language.isoeng
dc.publisherInstitute of Electrical and Electronics Engineers Inc.
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/
dc.sourcehttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84930989293&doi=10.1109%2fCIIMA.2014.6983443&partnerID=40&md5=a4e736290f03b6e43df922fd4d025cd6
dc.sourceScopus2-s2.0-84930989293
dc.titleStudy of the lower limp's angle during weightlifting exercises using an accelerometer-based system
dcterms.bibliographicCitationInstituto Distrital de Recreación y Deporte, , http://ider.gov.co/
dcterms.bibliographicCitationMayagoitia, R.E., Nene, A.V., Veltink, P.H., Accelerometer and rate gyroscope measurement of kinematics: An inexpensive alternative to optical motion analysis systems (2002) Journal of Biomechanics, 35 (4), pp. 537-542
dcterms.bibliographicCitationCheng, P., Oelmann, B., Joint-angle measurement using accelerometers and gyroscopes?a survey (2010) Instrumentation and Measurement, IEEE Transactions on, 59 (2), pp. 404-414
dcterms.bibliographicCitationFry, B., Reas, C., (2014) Processing Library for Visual Arts and Design, , http://www.processing.org, Aug
dcterms.bibliographicCitationXiao-Mao, G., Bao-Sheng, Z., Fan, Z., Yu-Jie, Y., Wei, Z., Xi, L., Optimal design model for crank-connecting rod mechanism of atype stirling engine (2011) Consumer Electronics, Communications and Networks (CECNet), 2011 International Conference On. IEEE, pp. 519-522
dcterms.bibliographicCitationVeltink, P.H., Franken, H.M., Detection of knee unlock during stance by accelerometry (1996) Rehabilitation Engineering, IEEE Transactions on, 4 (4), pp. 395-402
dcterms.bibliographicCitationDong, W., Chen, I., Lim, K., Goh, Y., (2007) Measuring Uniaxial Joint Angles with A Minimal Accelerometer Configuration, pp. 88-91
dcterms.bibliographicCitationDejnabadi, H., Jolles, B.M., Aminian, K., A new approach to accurate measurement of uniaxial joint angles based on a combination of accelerometers and gyroscopes (2005) Biomedical Engineering, IEEE Transactions on, 52 (8), pp. 1478-1484
dcterms.bibliographicCitation(2008) Producto Punto, , http://www.geoan.com/analitica/vectores/productopunto.html
dcterms.bibliographicCitation(2014) ADXL35 Datasheet and Product Info, , http://www.analog.com/en/mems-sensors/memsinertial-sensors/adxl335/products/product.html, Aug
datacite.rightshttp://purl.org/coar/access_right/c_16ec
oaire.resourceTypehttp://purl.org/coar/resource_type/c_c94f
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85
dc.source.event2014 3rd International Congress of Engineering Mechatronics and Automation, CIIMA 2014
dc.type.driverinfo:eu-repo/semantics/conferenceObject
dc.type.hasversioninfo:eu-repo/semantics/publishedVersion
dc.identifier.doi10.1109/CIIMA.2014.6983443
dc.subject.keywordsMechatronics
dc.subject.keywordsHardware and software
dc.subject.keywordsOpen platforms
dc.subject.keywordsAccelerometers
dc.rights.accessrightsinfo:eu-repo/semantics/restrictedAccess
dc.rights.ccAtribución-NoComercial 4.0 Internacional
dc.identifier.instnameUniversidad Tecnológica de Bolívar
dc.identifier.reponameRepositorio UTB
dc.relation.conferencedate22 October 2014 through 24 October 2014
dc.type.spaConferencia
dc.identifier.orcid56682876700
dc.identifier.orcid26325154200


Ficheros en el ítem

FicherosTamañoFormatoVer

No hay ficheros asociados a este ítem.

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem

http://creativecommons.org/licenses/by-nc-nd/4.0/
http://creativecommons.org/licenses/by-nc-nd/4.0/

Universidad Tecnológica de Bolívar - 2017 Institución de Educación Superior sujeta a inspección y vigilancia por el Ministerio de Educación Nacional. Resolución No 961 del 26 de octubre de 1970 a través de la cual la Gobernación de Bolívar otorga la Personería Jurídica a la Universidad Tecnológica de Bolívar.